Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > EcoTech Marine
Register Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Old 01/07/2019, 03:56 PM   #1
waverz
Slave to the reef!
 
waverz's Avatar
 
Join Date: Nov 2003
Location: Evansdale, Ia
Posts: 3,122
MP40qd Tank too close to wall for proper spacer

I have an 80 gallon tank that has been running for a few months. I decided I needed more flow and ordered an MP40qd. I found the dimensions of the dry side and measured the space between the wall and tank. I knew it would be close but the dimensions I found online didn't include the thickness of the spacer.

My glass looks to be near .25" I havent measured yet though.

So now I'm not sure what to do. The only spacer that will physically fit is the rubber gasket. Im assuming the pump wont work properly with the incorrect spacer.

I thought about possibly adding a .25" spacer in the tank to make the glass thickness adequate for the rubber gasket but im not sure that would even work.

Moving the tank might be possible but it would obviously mean draining it down to nothing and then possible sliding it but that is a huge undertaking.

Darn it. I might be sending this pump back. I dont want to but I really dont want to go through the hassle of moving the tank a half inch just so the pump will fit.

Sent from my SM-G955U1 using Tapatalk


__________________
Member of the Greater Iowa Reef Society.

Current Tank Info: 60 gallon Marineland Cube

Last edited by waverz; 01/07/2019 at 04:05 PM.
waverz is offline   Reply With Quote
Old 01/09/2019, 09:36 AM   #2
Tom39
Registered Member
 
Join Date: Apr 2013
Location: Spotsylvania, Virginia
Posts: 462
Have you tried contacting Ecotec directly regarding your issue? I have always found them to be very helpful when I have contacted them.
Regarding your question, my guess is that the thinner spacer won't cause issues with your dryside but may cause premature wear on the wetside. But that is only a guess and is not based on any facts or experience.

Good luck,
Tom

Sent from my SM-G930V using Tapatalk


__________________
150g cube, 40g sump, Rapid led, Neptune controller, LR, sandbed, ATS, PS

Current Tank Info: 150g Marineland Cube
Tom39 is offline   Reply With Quote
Old 01/09/2019, 02:26 PM   #3
Sisterlimonpot
R.C. Fraternity President
 
Sisterlimonpot's Avatar
 
Join Date: Dec 2008
Location: Litchfeild Park AZ
Posts: 11,442
Blog Entries: 2
That's correct, if you go without spacers the coupling of the magnets will be too strong and prematurely wear out your wet side.

Although I never thought about placing the spacer on the inside. I can't think of a reason why this wouldn't work. As long as you can get it to attach and sit flat on the glass, I'd be interested to know how that turned out.


__________________
Jimmy
MASVC President

Dishes are done man!

Current Tank Info: 300 in progress
Sisterlimonpot is offline   Reply With Quote
Old 01/10/2019, 09:12 PM   #4
ca1ore
Grizzled & Cynical

 
Join Date: Apr 2006
Location: Stamford, CT
Posts: 17,409
I had this problem on my last tank. I just made a poly carb disc of the appropriate thickness and put it under the wetside. Worked fine for years. I would not use acrylic as it may warp.


__________________
Simon

Got back into the hobby ..... planned to keep it simple ..... yeah, right ..... clearly I need a new plan! Pet peeve: anemones host clowns; clowns do not host anemones!

Current Tank Info: 450 Reef; 120 refugium; 60 Frag Tank, 30 Introduction tank; multiple QTs
ca1ore is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:30 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2019 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.